TK 61555-2-MM-EN
93
Figure 70.
Seal Cover for Compressor with Pressurized Seal Cavity
1.
“P” Indicates Pressurized Seal Cavity
Figure 71.
Model Number Location
1.
“X430P” Indicates Pressurized Seal Cavity
Hex Drive Compressor Seal Replacement
1. Remove the compressor from the unit.
2. Remove the six mounting flange bolts and remove the mounting flange.
3. Remove the three seal plate bolts and use a slide hammer to remove the seal plate.
N
No
otte
e:: Use slide hammer P/N 204-638 and adapter P/N 204-640 to obtain the 5/16-18 male
thread needed to fit the seal plate.
4. Place the seal plate gasket side down on a work bench and push the hard ring out of the seal
