![background image](http://html1.mh-extra.com/html/thermo-king/slxi-100/slxi-100_maintenance-manual_1104353096.webp)
96
TK 61555-2-MM-EN
Figure 75.
Internal Lip Seal Installation
1.
Lip Facing Into Seal Plate
13. Apply clean compressor oil to the O-ring inside the bellows. Slide the bellows on the
crankshaft, align the hex drive on the bellows with the hex drive collar, and push the bellows
firmly against the hex drive collar. Leave the protective cap in place during installation. If the
hex drive does not slide on easily, rotate the assembly 30 degrees.
Figure 76.
Hex Drive Bellows Installation (Shown Without Protective Cap)
1.
Hex Drive Collar
2.
Hex Drive