TK 61555-2-MM-EN
75
Figure 56.
Gauge Tool on Strut Bolts
1.
Gauge Tool P/N 2042436
13. Once the gauge tool fits perfectly and freely on the screw heads of the spring damper strut,
remove it and tighten the adjustment bolt and the pivot bolt to lock the eccentric plate in that
position.
14. Place the gauge tool over the heads of the spring damper strut bolts again to verify the
setting is correct.
15. Remove the gauge too and check the strut bolts to make sure thy are tight. The
recommended torque is 20 to 27 to 33 N•m (24 ft-lb).
Assembly of Tensioner Clutch
1. Remove the retainer from the arm pivot bolt.
2. Place the tensioner components on the support bracket.
Figure 57.
Place Tensioner Components on Support Bracket
1.
Eccentric Plate Pivot Bolt
2.
Eccentric Plate Adjustment Bolt
3.
Arm Pivot Bolt
