Instruction manual for MH & MH+M
98
4. Validate and finish the measurement using the key
.
5. Save one or several results in the measurement program/list by clicking on
. For
example, the delta value below has been stored in the measurement memory.
6. You can restart a measurement by establishing contact between the surface and the
probe, pressing
to go back to
ST1
mode (respectively
ST2
) or
to go back to the
main page.
15.5 Graph
In some cases, you might need to physically locate the maximum (respectively minimum)
position of the measured surface. During the measurement, a bar graph or galvanometer is
displayed to allow real-time visualization of the probe position.
