![background image](http://html.mh-extra.com/html/tesa/micro-hite/micro-hite_instruction-manual_1090543062.webp)
Instruction manual for MH & MH+M
62
Definition of keys
Change the process for a definition of the probe constant using the rib of the
master piece.
Change the process for a definition of the probe constant using the groove of
the master piece.
Once the process is finished and the probe constant defined, a calibration block is automatically
created in the measurement list of the mode. The measurements can then start in
ST2
mode.
The next step is to define the reference as shown in the following image.