![background image](http://html.mh-extra.com/html/tesa/micro-hite/micro-hite_instruction-manual_1090543086.webp)
Instruction manual for MH & MH+M
86
13.3 Reference value
management
In
ST1
mode, the reference values are managed the same way as in ST2
mode.
13.4 Secondary
functions FX
In
ST1
mode, secondary functions are accessible via key
.
•
Angle measurement (for further details, see this
•
Min, max, Δ (for further details, see this
•
Programs’ management and tolerancing (for further details, see this
•
Delete all measurement blocks and delete reference values in the memory
•
Delete one or several measurement blocks
The
Min, Max, Δ
mode is only active and selectable if the reference
value has already been measured before.
Once the Angle
or
Min, max, Δ
mode selected, it is possible to go
back to ST1
one by pressing the key
.
13.5 Context-based
actions
All actions of
ST1
mode, displayed and usable from the bar at the back of the screen are
also displayed and usable with
ST2
mode.
ST2
mode integrates the actions of
ST1
mode.