![background image](http://html.mh-extra.com/html/tesa/micro-hite/micro-hite_instruction-manual_1090543087.webp)
Instruction manual for MH & MH+M
87
14 ST2 MODE
14.1 Generality
Each time when entering
ST2
mode, it is necessary to calibrate the probe
. Once this
has been carried out, you can either probe up or down for any measurement sequence.
Examples of a measurement sequence in
ST2
mode
This mode is accessible from the main menu by activating the key
at any moment.
14.2 Probe calibration
When entering
ST2
mode, the probe calibration process starts automatically (for further
The procedure for determining the probe constant is only re-executed if
the user leaves the ST2 mode and enters in another mode (ST1
,
Perpendicularity
). Thus, an intermediate modification of a system
parameter (in
) or the use of the integrated calculator does not imply
a re-determination of the probe constant.
14.3 Capturing the
reference value
When entering
ST2
mode, once the probe calibration has been performed, the reference
values can be captured through single or double probing.