TERRY Melody 1, Installation Manual

Page: 41 / 66

Terry Melody 1 - Installation Instructions - ED01050g
41
XB00223 Page 3 of 14
AUTHOR: MK 29/04/2010
Terry Group Internet > Production > Bulletins
2. Fasten the back panel angles to each gate post in the orientation shown using the
(CF095) St. St. Rivets provided.
IMPORTANT: Consider gate handing before fastening panel angles, angles should be
attached on the inside of the posts.
Cut the gate posts to the required length and generously apply super-trol to the cut.
3. Having attached the panel angle and cut the
posts to length, place the gate posts onto the
base plate location pins and fasten
loosely
through the plinth into the post using the (CB303)
M10 x 30 Hex Bolts and (CZ015) M10 Washer
from the common fixing kit (LS39561)