TERRY Melody 1, Installation Manual

Page: 47 / 66

Terry Melody 1 - Installation Instructions - ED01050g
47
XB00223 Page 9 of 14
AUTHOR: MK 29/04/2010
Terry Group Internet > Production > Bulletins
10. Finally fit the gate post side blanking plates found in the fixing kit (LS38966) using the
plate/gland kit (LS38941) for the wire outlet side.
The gland provided is a 25mm gland and therefore requires 25mm conduit rather than the
standard 20mm
A second blanking plate is provided in the event that conduit as been pre fitted between the
gate posts.
When the gate and lift are completely assembled, finaly lay the (LT03041) anti slip tape
provided over the middle set of plinth fixings, ideally achieving an equal spacing between the
pre fitted strip and the rear edge of the plinth.
LT03041 – Anti Slip Tape