TERRY Melody 1, Installation Manual

Page: 17 / 66

Terry Melody 1 - Installation Instructions - ED01050g
17
ref: ED01059c, dated: 29/01/2010
MELODY 1 INSTALLATION TEST CERTIFICATE
(PAGE 3 OF 3)
B.3. BASIC SAFETY SYSTEM CHECKS
Hose condition and connectors
Check call station operation x3 - check all buttons work with key on and
stop works with ley off
Check carriage gate interlock operation - ensure the gate only releases
at correct level / check gate stays locked during travel / check no
operation with gate open / proximity switches x 1
Check upper level gate interlock operation if fi tted - ensure the gate only
releases at correct level / check gate stays locked during travel / check
no operation with gate open / proximity switches x 1
Check gate beaks are secure - check tightness of beaks and brackets
Check main ram rollers
Check remote control enable operation (if fi tted)
Check S/Edges operation x 4 - check lift stops when obstructed (4
corners) / check lift rides away from obstruction / check no sticking
edges
B.4. DECLARATION A
I/We certify that on / / this Steplift was installed to the latest
installation instructions and thoroughly examined and found to be free from
obvious defects and to comply with the requirements of BS 6440 and that the
foregoing is a correct report of the examination.
Signed:- Qualifi cations:- Authorised
Installer
Address:- Date:-
CERTIFICATE OF ACCEPTANCE BY PURCHASER/USER
I/We being the purchaser/user of this Terry Melody 1 (serial No.
) have received, and fully understood, verbal and written
instructions, in association with a demonstration, from
on its correct and safe use.
Signed:- Date:-
NOTES