TERRY Melody 1, Installation Manual

Page: 58 / 66

Terry Melody 1 - Installation Instructions - ED01050g
58
XB00218 Page 1 of 1
AUTHOR: MK 29/06/2010
Terry Group Intranet > Production > Bulletins
1. Measure the height of the bridging step from the top of the upper step to the lift
platform and divide the figure by 3 to get the step height increments.
2. Adjust the bottom step to this figure using the collar situated on the step upright.
3. Once the lower step is adjusted, use the adjustment collar for the second and third
steps to achieve equal heights for all 3 steps.
2
Measure the height of
the Bridging Step from
the upper level to the
Platform.
LIFT PLATFORM
Use the adjustment
collars to adjust the
heights of the step
and achieve equal
heights between each
step.
3
TRIPLE BRIDGING STEP HEIGHT ADJUSTMENT (XB00218)