Tennant A80 Operating Manual Download Page 16 | Manualshive

Page: 16 / 59

background image

996227

16

» Do not expose the electrical parts to steam jets when using a steam cleaner. Prevent steam or

water from entering the exhaust.

After maintenance

» Replace all protective mantles and other dismantled components.

Repairs

» Repairs may only be carried out by qualified and authorized persons (see § 1.2). Always consult

the maintenance manual before carrying out any repairs.

» If the vehicle is defective, place a warning on the steering wheel and remove the key from the

ignition.

2.6.

Safety regulations for transport

Loading the vehicle for transportation

» Only loading platforms that are able to support the load and are sufficiently stable may be used.

The ramp gradient must be less than the maximum climbing capability of the vehicle (15%).

» Prevent the vehicle from overturning or sliding off during loading.
» Protect the vehicle from rolling off, shifting or overturning on a transport vehicle.

Towing the vehicle

See Chapter 8.

Not observing the regulations above is considered as gross negligence. TENNANT
cannot be held liable for any damage if you do not observe the safety regulations and
measures mentioned above.

2.7.

Safety provisions

The vehicle is fitted with a number of automatic and manual safety provisions to guarantee the
safety of people and the vehicle.

2.7.1.

Automatic provisions

These safety provisions have been/are activated automatically and must not be neutralized

in any

way

.

» Automatic brake-light system
Turned on as soon as the vehicle decelerates.

» Sensor mat in driver’s seat
Disconnects the brushes and the driving function when the driver is not sitting on the seat.

» Reverse alarm
Acoustic signal that can be heard when the vehicle reverses.

» Warning alarm
Acoustic signal that can be heard when the rubbish hopper is tipped, lowered or when the
tailboard opens or closes.

«
...
14
15
16
17
18
...
»

Summary of Contents for A80




























































Reviews:

No comments

Related manuals for A80

Brand: Walker Pages: 40

Brand: Kärcher Pages: 136

Brand: Topfloor Pages: 24

Brand: EUROM Pages: 48

(-)(-)80MSX050A30SA

Brand: Rheem Pages: 52

Brand: iPA Pages: 6

Brand: McCulloch Pages: 30

Brand: Cub Cadet Pages: 28

Brand: Ribimex Pages: 28

Brand: P3 International Pages: 64

Brand: Kubota Pages: 36

Brand: Snapper Pages: 52

Brand: Troy-Bilt Pages: 16

Brand: EarthWise Pages: 48

Brand: Far Tools Pages: 18

Brand: Zenoah Pages: 60

Brand: SaMASZ Pages: 31

Brand: LawnMaster Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands