996227
32
4.
VEHICLE OPERATION
Always observe the safety regulations and measures described in § 2.2, § 2.3, § 2.4
and § 2.7.
Before entering traffic, the operator should be sufficiently familiarized with the handling of the
sweeper vehicle. This applies particularly to the large steering radius (70°) and the hydraulic drive
mechanism.
After sufficient practice with the sweeper vehicle the operator may participate in traffic as long as
local traffic regulations are observed.
Drive carefully at all times, particularly when driving up or down gradients. This means that the
driving style should always be adapted to prevailing conditions.
•
All manoeuvres should cease if traffic conditions do not allow for their execution.
•
In connection with safety:
o
the vehicle must have sufficient lights, and
o
the warning beacons must be switched on.
4.1.
Before driving
Before driving the vehicle the “checkpoints for sweeping” in § 9.1 should be studied.
» The seat must be adjusted to the driver’s build to improve seating comfort and prevent
physical complaints. For the adjustment options please refer to the original operating manual
of the chair (supplied).
» The mirrors should be adjusted manually so that the driver can observe the following from his
seat:
-
The brushes must be visible in the top outside mirrors on both sides of the vehicle.
-
Via the rear-view mirrors on both sides of the vehicle it must be possible to observe
traffic in the immediate vicinity of the rear of the vehicle.
4.2.
Starting the vehicle
The vehicle can only be started when:
•
the driver is seated,
•
the hand brake is engaged,
•
the forward / reverse selector is in neutral (N).
1)
Occupy the driver's seat.
2)
Place your right foot beside the pedal.
3)
Put the forward / reverse selector in neutral (N) (see § 3.2).
4)
Engage the hand brake.
5)
Check that all functions are deactivated.
Summary of Contents for A80
Page 1: ...996227 1 OPERATING MANUAL A80 ...
Page 59: ...996227 59 ...
