Tennant A80 Operating Manual Download Page 12

Page: 12 / 59

996227

Non-regulated use

» The vehicle can lead to dangerous situations if it is used:

by insufficiently qualified/unqualified personnel,

inexpertly, or

in contravention of the instructions.

Who may operate the vehicle?

» Only qualified and designated persons over the age of 18 may operate the vehicle.

They should be aware of their responsibilities and take these into account.

» Persons under the influence of alcohol, medication and/or drugs may

not

operate, maintain or

repair the vehicle.

» Maintenance and repairs may only be carried out by qualified and authorized persons (see § 1.2).

Converting and modifying the vehicle

» It is prohibited to modify the vehicle yourself.
» Only use original components, accessories and lubricants. These have been designed, approved

and released especially for the vehicle by TENNANT

2.3.

Safety regulations for taking into use/starting

Before starting

» Ensure that you are familiar with:

the instrument panel,

the operating and steering elements,

the operation of the vehicle, and

the operational radius.

» Before boarding the vehicle, first check:

that no persons or obstacles are in the vicinity of the vehicle,

that the vehicle is free of oil-based or inflammable materials,

that the windows, handles, steps and operating areas are free of oil, grease, fuel, rubbish,
snow and ice, and

that the protective shields are closed and locked.

» Only use the steps and handles intended for the purpose when boarding the vehicle.
» Before starting, check:

that there are no obvious defects to the vehicle,

that all protective shields and safety measures are in place,

that the steering wheel, brakes, operating controls, lighting and horn are functioning,

that the seat is adjusted properly,

that the mirrors are adjusted properly.

» Never start the vehicle if the instruments, warning lamps or steering mechanism are defective in
any way.
» Do not place any loose objects in the vehicle or affix anything to the vehicle.

Starting

» Only start and operate the vehicle from the driver's seat.
» Before starting:

engage the hand brake, and

set all operating functions to neutral.

Summary of Contents for A80




























































Search results

Summary of Contents for A80

Reviews:

Related manuals for A80

Brands by name

Popular brands

Tennant A80, Operating Manual

Search results

Summary of Contents for A80

Reviews:

Related manuals for A80

Brands by name

Popular brands