Snappi System User Manual
Document No: 053-05 v29
Page 63 of 75
December 2015
Snappi System User Manual.doc
Fig 6.14.3
With the cylinder in place, pull on the end of
the strap to tighten, and then close the cam
lock to secure it in place.
To remove a cylinder, loosen the straps and
lift it out.
Notes:
•
Always ensure the cylinder is securely strapped into the carrier before using the
pushchair.
•
The maximum carrying load for the vertical cylinder carrier is 5kg.
•
Depending on the size of bottle used, it could adversely affect the stability of the
pushchair. If this is a concern, a risk assessment must be carried out, and if
necessary stability tests performed on the loaded assembly.
•
Always ensure that the total load of the occupant and accessories does not exceed
the maximum carry limit stated for the pushchair (see section 1 of this manual).
•
The content of the vertical cylinder carrier must be removed before transporting the
pushchair in an adapted vehicle.
7. User Instructions
7.1 Getting into the Snappi Pushchair
1. Put the brakes on.
2. Place the child into the seat so that their feet are on the footplate.
3. Fit the pelvic strap (and or a harness) to the child and secure.
4. Fit foot straps and ankle straps if required.
7.2 Getting out of the Snappi Pushchair
1. Put the brakes on.
2. Undo any harnessing and foot straps.
3.
Lift the child from the seat.
