Snappi System User Manual
Document No: 053-05 v29
Page 39 of 75
December 2015
Snappi System User Manual.doc
Next, unscrew the frame mounting to open
the jaws until it will fit over the frame.
Position the mounting onto the upper frame
tube (see fig 5.3.4 below).
Adjust the angle of the clip so that it is
vertical.
Fig 6.3.3
Fig 6.3.4
When in the desired position, retighten the
screw to lock it onto the frame
Finally, clip the umbrella section back onto
the mounting by pushing the 2 halves of the
clip back together, and open the umbrella.
If a different angle is needed, simply loosen
the locking screw, move to the required
angle and retighten.
Important:
•
You must remove the umbrella
section before folding the frame (the
frame mounting clip can be left in
place).
•
The entire sun umbrella must be
removed when using the pushchair as
a seat in a motor vehicle.
