Snappi System User Manual
Document No: 053-05 v29
Page 26 of 75
December 2015
Snappi System User Manual.doc
Finally, secure the laterals by screwing
the provided hand wheels onto the
protruding threads of the coach bolts
(see Fig 5.1.4.5).
The position of the laterals can be
adjusted laterally by loosening the hand
wheels and sliding them in or out to the
required width.
They can be adjusted vertically by
sliding up and down the mounting slots
‘H’(see fig 5.1.4.3). There is a partition
in the slots between the upper and
lower back plates. To achieve the full
adjustment range, the laterals need to
be fitted in the appropriate section of
the slots.
Fig 5.1.4.5
5.2 Fitting and removing the cover
Fig 5.2.1
To remove the seat pad:
Simply lift the front edge of the seat pad to
separate it from the Velcro strip on the
base.
To remove the hip guide covers:
The cover hooks around the front of the hip
guide plate. To remove, lift and rotate the
cover from the rear as shown, and then
unhook the cover from under the front of the
hip guide plate.
Fig 5.2.2
