Snappi System User Manual
Document No: 053-05 v29
Page 37 of 75
December 2015
Snappi System User Manual.doc
6.2: Equipment Carrying Tray
To Fit the equipment carrying tray:
The equipment-carrying tray has 2 sets of
fixing points on its underside to secure it to
the chassis (see right).
Feed the tray under the wheelbase from the
front of the chassis and hook the rear points
‘A’ under the rear cross bar, ensuring that
the tray is in the middle so it sits in-between
the vertical brake bars.
Next, with the front turn catch ‘B’ rotated out
of the way; rotate the tray down so it sits on
the front cross bar.
Finally turn the front catch ‘B’ 90 degrees so
it sits under the front cross bar (this catch
may be quite tight).
Fig 6.2.1
Fig 6.2.2
To remove the tray, unlock catch B, lift up
and remove the tray from the chassis.
Important:
•
Always
ensure
the
equipment-
carrying tray is securely fitted before
use.
•
The maximum carrying load for the
equipment-carrying tray is 25kg.
•
Always ensure that the total load of
the occupant and accessories does
not exceed the maximum carry limit
stated for the pushchair (see section
1 of this manual).
•
The equipment-carrying tray must be
removed before folding the chassis.
•
The equipment-carrying tray must be
removed when using the pushchair
as a seat in a motor vehicle.
