Snappi System User Manual
Document No: 053-05 v29
Page 33 of 75
December 2015
Snappi System User Manual.doc
Thread the two top straps through the slots in the back
cover and back plate, from front to back, at the desired
height (Fig 5.6.6)
Thread the webbing through the
cam buckles until the harness is
at the desired height and then
close the cam buckles to secure
the webbing (Fig 5.6.7).
To fit the cam buckles: thread the supplied bolts
and washers through the holes in the webbing
straps and screw through the fixing holes in the
bar on the rear of the seat (Fig 5.6.4). For a size
1 Snappi we recommend using the inner holes,
and for the size 2 Snappi the outer holes. Tighten
using a 3mm Allen Key so that the cam buckles
face outwards (Fig 5.6.5)
Fig 5.6.6
Fig 5.6.7
Fig 5.6.4
Fig 5.6.5
