Snappi System User Manual
Document No: 053-05 v29
Page 10 of 75
December 2015
Snappi System User Manual.doc
The following items should be fitted to the seat as standard:
Item
Component
QTY.
Yes
No
5
Hip guide covers
2
6
Seat Base Cover
1
7
Seat Back Cover
1
8
Side Pads
2
9
Hip Belt
1
Please note, accessories such as lateral supports or harnessing that were ordered at the
same time as the pushchair will be included in the main package.
Larger accessories will be packaged in separate cartons (e.g. the rain cover).
IMPORTANT:
If any items are damaged or missing, then please contact Tendercare, preferably by email at
or alternatively please call us on (01903) 726161 within 36 hours of
delivery.
After unpacking and checking you have all components and they are in good condition
dispose of the packaging at your local recycling centre. Alternatively retain and reuse.
3.1: Serial Numbers
It may be a good idea, at this point, to make a note of your Snappi serial numbers on the
front of your user manual as you will require these if you wish to purchase any accessories
from Tendercare. There will be two serial numbers on your buggy – one for the chassis
and one for the seat. However, if your buggy was purchased on your behalf by Wheelchair
Services or another organisation, it may have other numbers put on by them as well.
The ones we require are a TEN/SC…. and a TEN/SS….
The SC one is located on the chassis (on the bar between the two rear wheels and will
look like TEN/SC1234) and the SS one is located on the seat (when the seat is in the
buggy, where the back and seat join and will look like TEN/SS1234).
4: Preparing the wheelbase for use
WARNING:
When opening or folding the wheelbase, ensure that you hold the frame so that you
avoid any danger of catching your fingers in moving parts.
Keep children clear of the wheelbase during opening and folding.
