Snappi System User Manual
Document No: 053-05 v29
Page 40 of 75
December 2015
Snappi System User Manual.doc
6.4: Sun Hood and Transparent Rain Shield
Fig 6.4.1
The Sun Hood and Rain shield are two
separate items.
In order to fit the Transparent Rain Shield,
you must first fit the Sun Hood by following
the below instructions.
The sun hood is mounted directly to the seat
and is compatible with any seating position
(the hood may require adjusting).
The rain shield can be used with tilt-in-
space, however it is not compatible with
back recline. The transparent rain cover
(section 6.5) should be used instead of the
rain shield if back recline is a postural
requirement for your child.
The Sun Hood will arrive folded flat with its
brackets folded in. (See Fig 6.4.2) There will
be two thumb screws, one on either side of
the hood(See Fig 6.4.3).
Fig 6.4.2
Fig 6.4.3 Fig 6.4.4
First loosen the thumb screws on either side
of the hood (See Fig 6.4.3) Then unfold both
tubes so that they are facing the bottom of
the hood.(See Fig 6.4.4).
