Snappi System User Manual
Document No: 053-05 v29
Page 44 of 75
December 2015
Snappi System User Manual.doc
6.4b: New Style Sun Canopy Fixings:
Pushchairs supplied in, or after January 2013 will be fitted with new sun canopy receivers
on the seat to make the fitting and removal of the sun hood easier. The following
instructions detail how to fit the updated sun canopy to a seat with the new receivers.
Please note if you have an older seat the original hood is still available. Alternatively your
seat can be returned to the Tendercare factory and the new receivers can be retro-fitted
(charges applicable, please contact Tendercare for more information).
Fig 6.4b.1
Fig 6.4b.1, Left:
The updated seat with new sun canopy
receivers fitted (see arrows).
Fig 6.4b.2, Right: The updated sun hood,
note this hood has no tube clips as the
mounting poles slide into the new receivers.
Before fitting the hood, unfold the 2
mounting poles and position them flat as
shown. Ensure that both poles are adjusted
to the same angle as otherwise it will make
it difficult to fit the hood to the seat.
Fig 6.4b.2
