Teledyne Everywhereyoulook T3PM1100, User Manual, Page: 222 / 227

T3PM1100 User Manual
222
EN 61000-4-4:2012 Electrical Fast Transient/Burst, 1 kV on power
supply lines, 0.5 kV on I/O signal data and control lines
4
EN 61000-4-5:2014+A1:2017 Power Line Surge, 1 kV AC Mains, L-N,
L-PE, N-PE
4
EN 61000-4-6:2014 RF Conducted Electromagnetic Field, 3 Vrms,
0.15 MHz - 80 MHz
EN 61000-4-11:2004+A1:2017 Mains Dips and Interruptions, 0%/1
cycle, 70%/25 cycles, 0%/250 cycles
4 5
1 To ensure compliance with all applicable EMC standards, use high-
quality shielded interface cables.
2
Emissions which exceed the levels required by this standard may occur when the
instrument is connected to a test object.
3
This product is intended for use in nonresidential areas only. Use in residential
areas may cause electromagnetic interference.
4
Meets Performance Criteria “B” limits of the respective standard: during the
disturbance, product undergoes a temporary degradation or loss of function or
performance which is self-recoverable.
5
Performance Criteria “C” applied for 70%/25 cycle voltage dips and for 0%/250
cycle voltage interruption test levels per EN61000-4-11.
European Contact:*
Teledyne GmbH, European Division
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: + 49 6221 82700
AUSTRALIA & NEW ZEALAND DECLARATION OF
CONFORMITY – EMC
The instrument complies with the EMC provision of the Radio
Communications Act per the following standards, in accordance
with requirements imposed by Australian Communication and
Media Authority (ACMA):