Teledyne Everywhereyoulook T3PM1100, User Manual, Page: 199 / 227

APPENDIX
199
Specifications
Below are the basic conditions required to operate the T3PM1100
within specification:

Calibration: Yearly
 Operating Environment:
18~28 ˚C (64.4~82.4˚F)
 Humidity: <80%RH,

Accuracy: ± (% of r % of range)

The specifications apply when the unit is warmed up for at least
30 minutes and operates in the slow rate.

The power supply cable must be grounded to ensure accuracy.

Input voltage and current must be standard sine wave.

The power factor must be 1.

The crest factor must be 3.

The common-mode voltage must be zero.
General Specifications
Specification Conditions:
Temperature: 23
˚
C±5
˚
C
Humidity: <80%RH(non-condensing)
Operating Environment: (0~40
˚
C)
Temperature Range: 30~40 ˚ C, Relative Humidity: <70%RH(non-condensing);
>40
˚
C, Relative Humidity: <50%RH(non-condensing)
Indoor use only
Altitude: <2000 meters
Pollution degree 2
Storage Conditions (-40~70
˚
C)
Humidity: <90%RH(non-condensing)
General:
Power Source: 100-240 VAC 50/60Hz
Power Consumption: Max 30VA
Bench Dimensions: 268 mm (W) X 107 mm (H) X 379 mm (D) (w/t bumpers)
Weight: Approximately 2.9 kg