Teledyne Everywhereyoulook T3PM1100, User Manual, Page: 205 / 227

APPENDIX
205
DC
Measurement
synchronization source
Select voltage, current, or off
In the case of Auto Update Rate, select the voltage or
current from the equipped element.
Line filter Select OFF or ON (cutoff frequency at 500 Hz).
Peak measurement
Measures the peak (max, min) value of voltage,
current or power from the instantaneous voltage,
instantaneous current or instantaneous power that is
sampled.
Zero-level compensation
Removes the internal offset of the measure unit
(After measurement range is changed)
Measurement parameters
Voltage Vrms , Vmn, Vdc , Vac
Current Irms , Idc , Iac
Active Power P
Apparent Power VA
Reactive power VAR
Power Factor PF
Crest Factor CFI,CFV
Phase Angle DEG
Frequency IHz and VHz
Voltage Peak V+pk and V-pk
Current Peak I+pk and I-pk
Active Power Peak P+pk and P-pk
Total Harmonic Distortion THDI and THDV
Mathematical Computation MATH
Maximum Current Ratio MCR
Frequency Measurement
Item Specifications
Measurement item Voltage and current
Measurement frequency
range
Data update interval Measurement Frequency Range
0.1 s
20 Hz
≤
f
≤
100 kHz
0.25 s 10 Hz ≤ f ≤ 100 kHz
0.5 s 5 Hz ≤ f ≤ 100 kHz
1 s
2.0 Hz ≤ f ≤ 100 kHz
2 s 1.0 Hz
≤
f
≤
100 kHz
5 s 0.5 Hz
≤
f
≤
100 kHz
10 s 0.2 Hz ≤ f ≤ 100 kHz