Telecor DP200 User Manual Download Page 66

Page: 66 / 83

Telecor DP200 Display Phone User’s Guide

Press the number of minutes between pages,
followed by the

key.

Note

The Paging Interval can be set up from a minimum
of 1 minute to a maximum of 34,464 minutes. If
you enter an interval greater than 34,464 minutes,
the system sets the interval to 34,464 minutes.

Redirecting New Voice Mail Messages to
Other Extensions

Press

while in the Advanced Voice Mail

Notification options of your Voice Mail.

2. Press the list of extensions for Voice Mail

redirect. After you enter an extension, a voice
recording verifies the extension entered.

Note

If you do not know the extension of a person, press

to enter a Dial by Name directory. This directory

allows you to enter the first three letters of a
person’s last name, instead of their extension.

•

You can enter up to 20 extensions.

3. Press the

key when your extensions list is

complete.

Turning Off Redirecting New Voice Mail
Message

Press

while in the Advanced Voice Mail

Notification options of your Voice Mail.

2. Press only the

key when prompted to enter the

list of extensions for Voice Mail redirect. This
clears any extensions set up to receive your
redirected Voice Mail messages.

PRS

TUV

PRS

Summary of Contents for DP200




















































































Search results

Summary of Contents for DP200

Reviews:

Related manuals for DP200

Brands by name

Popular brands

Telecor DP200, User Manual

Search results

Summary of Contents for DP200

Reviews:

Related manuals for DP200

Brands by name

Popular brands