Telecor DP200 User Manual Download

Page: 45 / 83

Telecor DP200 Display Phone User’s Guide

Note

Page Volume has eight volume settings and an Off
setting.

4. Slide the

PROGRAM

switch to the left to return to

the main status display.

Changing Ring Select

To change Ring Select settings, complete the following
steps:

1. Slide the

PROGRAM

switch to the right.

Note

Switching between Office Mode and Warehouse
Mode automatically returns the Page Volume, Ring
Select and Ringer Volume settings to the program
defaults.

3. Slide the

PROGRAM

switch to the left to return to

the main status display.

Changing the Page Volume

To change Page Volume settings, complete the following
steps:

1. Slide the

PROGRAM

switch to the right.

2. Press

to display Page Volume.

Note

You can scroll through Program options by
pressing either the

key

or the

key.

3. Press the

VOLUME

button next to the

SPEAKERPHONE

button to increase or decrease

the Page Volume.

PROGRAM

PGRM

VOLUME

PRGM

Figure 6

Page Volume

Program Mode

Page Volume

PGRM

Summary of Contents for DP200




















































































Search results

Summary of Contents for DP200

Reviews:

Related manuals for DP200

Brands by name

Popular brands

Telecor DP200, User Manual

Search results

Summary of Contents for DP200

Reviews:

Related manuals for DP200

Brands by name

Popular brands