Tektronix AWG7000 Series, Service Manual

Page: 82 / 140

Removal and Installation Procedures
4-30
AWG7000 Series Service Manual
Figure 4-14: Disassembly of the CLK10G module
Relay Unit (for Option 02) You need a screwdriver with a T-15 Torx tip and a 5/16 inch torque wrench (items
1, 2, and 9).
Removal.
To remove the relay unit, refer to Figure 4-13 on page 4-28 and follow
these steps:
1. Remove the handle unit, snaps, cosmetic covers, front-trim unit, and EMI
covers.
2. Orient the instrument so that the top is on the work surface.
Shield cover
Top shield case
Bottom shield case
CLK10G board
J3350
J3320