Tektronix AWG7000 Series, Service Manual

Page: 69 / 140

Removal and Installation Procedures
AWG7000 Series Service Manual
4-17
1. Remove the cosmetic covers, front-trim unit, and EMI covers.
2. Remove the LCDA board and Front Panel board:
a. Remove the four screws securing the LCDA board and Front Panel board
to the front-panel bracket.
b. Remove the cables from J110, J160, and J200.
c. Lift the boards away from the front-panel bracket.
3. Remove the touch screen module:
a. Remove the two screws securing the touch screen module to the
front-panel bracket.
b. Disconnect the cable from J200 on the LCDA board.
c. Lift the touch screen module away from the front-panel bracket.
Figure 4-7: Disassembly of front-panel assembly
Front-panel bracket
LCD module
LCDA board
Front Panel board
FSW board
Inverter board
Touch screen module