Tektronix AWG7000 Series, Service Manual

Page: 64 / 140

Removal and Installation Procedures
4-12
AWG7000 Series Service Manual
Figure 4-4: Handle, snaps, cosmetic covers, and front-trim unit removal
Cosmetic Cover (Top)
You need a screwdriver with a T-15 Torx tip (items 1 and 2).
Removal.
To remove the top cosmetic cover, refer to Figure 4-4 and follow these
steps:
1. Remove the snaps.
2. Remove the two screws securing the cosmetic cover to the chassis.
3. Loosen the cover with a detaching tool, such as a flat-blade screwdriver.
Handle base bracket
Front-trim unit
Snap
Cosmetic cover (top)
Cosmetic cover (bottom)