Tektronix AWG7000 Series, Service Manual

Page: 105 / 140

Troubleshooting
AWG7000 Series Service Manual
4-53
Hardware Error
Table 4-8 lists the instrument hardware related errors.
270000002 HwExecYigCal PLL 5GHz offset underflow vtune=xxxx CLK10G CLK10G: U3200, U3250, Y3280
270000003 HwExecYigCal PLL 5GHz tuning underflow vtune=xxxx CLK10G CLK10G: U3200, U3250, Y3280
270000004 HwExecYigCal PLL 5GHz tuning underflow vtune=xxxx CLK10G CLK10G: U3200, U3250, Y3280
270000005 HwExecYigCal PLL 10GHz tuning over 4095 vtune=xxxx CLK10G CLK10G: U3200, U3250, Y3280
270000006 HwExecYigCal PLL 10GHz tuning overflow vtune=xxxx CLK10G CLK10G: U3200, U3250, Y3280
290000000 Marker Level Calibration has not been completed. N/A
290000001 Marker cross point calibration result exceeds limit. OUT10G OUT10G: U120, U170
290X00000 Marker Level Calibration has not been completed at CHX. N/A
290XY0001 Marker cross point calibration result exceeds limit at CHX,
MARKER Y. OUT10G,
AWG10G OUT10G: U120/170, U470/480,
J100/110/150/170
AWG10G: J110A/111A/115A/
116A/110B/111B/115B/116B
290XY0002 Marker cross point calibration couldn't be converged on -1.0V at
CHX, MARKER Y. OUT10G,
AWG10G OUT10G: U120/170, U470/480,
J100/110/150/170
AWG10G: J110A/111A/115A/
116A/110B/111B/115B/116B
Table 4-7: Calibration error (cont.)
Error code Error log message Possible defect
on board Note
Table 4-8: Hardware error
Error code Error log message Possible defect
on board Note
300000000 The system cannot find the device specified. MIO MIO: U100, U200, U220,Y230
300000001 The device is not ready. N/A
300000002 The AWG register access timeout period has expired. MIO: U200, U300
AWG10G: U1000
MIO-AWG10G Cable
300000003 The time-out was generated while measuring data. AWG10G AWG10G: U1000
300000004 The timer for the trigger has stopped. AWG10G AWG10G: U1000
300000005 PLL doesn't lock. AWG10G,
CLK10G AWG10G: U1000
CLK10G: U3200, U3250,Y3260...
300000006 AwgController DLL doesn't lock. AWG10G AWG10G: U1000
300000007 Output board access error Board= No
No: Board number (Start with 0)
OUT10G OUT10G: U500
300000008 Not enough storage is available to process. N/A
300000009 Calibration checksum data has an error. MIO MIO: U300,U390
300000010 Calibration version unmatched. MIO MIO: U300,U390
300000011 YIG tuning has an error. CLK10G CLK10G: U3200, U3250,Y3260...