Tektronix 070-8462-03, Instruction Manual

Page: 24 / 271

Getting Started
1735 HD High Definition Waveform Monitor
1–3
displayed separately, in parade mode, or in overlay mode. Composite input
signals can be selected individually, and component signals are selected in sets of
three.
In addition to the VCR bridge and the typical Master Control monitoring
applications, this monitor can be used in camera chains. It has a 3 Line/Field
Parade display, with the Parade signal and enable input through the rear-panel
REMOTE connector. Ground closures are used to control the remote functions.
Options
The standard instrument is shipped with a P31 (green) phosphor CRT installed.
Option 74 instruments are shipped with a P4 (white) phosphor CRT installed.
Any of the power cord options described in Appendix A can be ordered for the
1735 HD. If no power cord option is ordered, instruments are shipped with a
North American 125 V power cord. CSA certification applies only to products
using CSA certified power cords. Options A1, A2, and A3 are not CSA certified.
Accessories
The standard 1735 HD is shipped with these standard accessories part numbers
are available in the Replaceable Mechanical Parts list:
1 Manual, Instruction
3 Replacement light bulbs for graticule
3
Replacement air filters for fan
1 Cable assembly for selected power plug option
1 Replacement cartridge fuse (correct rating for the power plug option)
You can order these optional accessories for use with the 1735 HD:
Viewing Hood (016-0475-00)
Front Panel Cover (200-3897-01)
Extender Board (order 2) (670-7981-00)
CRT Options
Power Cord Options
Standard Accessories
Optional Accessories