Tektronix 070-8462-03, Instruction Manual

Page: 69 / 271

Specifications
3–4
1735 HD High Definition Waveform Monitor
Table 3–4: Horizontal deflection system (Cont.)
Characteristic
Check
step
Supplemental information Performance requirements
2 Line Sweep Equal to half line rate of applied
video or external sync.
Sweep Magnifier Registration Magnification occurs about the
center of the screen in TWO LINE
operation.
Timing Accuracy All timing and linearity specifications
exclude the first and last major
divisions of the unmagnified display. 5
10
m
s/div. (TWO LINE) Within 2%. 525/625 line standards 5
5
m
s/div. (ONE LINE) Within 2%. 525/625 line standards 5
1
m
s/div. (TWO LINE+MAG) Within 2%. 525/625 line standards 5
0.2
m
s/div. (ONE LINE+MAG) Within 2%. 525/625 line standards 5
Integral Linearity Within 1%. Measured between the 10
m
s and
110
m
s points on the 10
m
s/division
sweep. Time marks fall exactly on
graticule marks.
5
HORIZONTAL Position Any portion of a synchronized video
sweep can be positioned on screen
in all sweep modes except ONELINE
and ONEFIELD. Second sync can
be positioned on screen. 4
LINE SELECT Display s the selected line in ONE
LINE. Displays the selected line first
in TWO LINE.
Intensifies selected line in TWO
FIELD.
In 14-LINE, displays overlayed lines
in ONE LINE or TWO LINE, intensi-
fies the selected 14 lines in TWO
FIELD. A bracketed 14 follows the
line number on the CRT Readout in
14-LINE mode.
READOUT When READOUT is selected:
Lines per Frame/Frame Rate, and
Time/Div are shown across the
bottom of the screen.
In Line Select, the number of the
selected line is displayed in the
upper left portion of the screen. If
14-LINE mode is also selected, [14]
is shown to the right of the selected
line number.