Operating Basics
2–8
1735 HD High Definition Waveform Monitor
Once the main menu is displayed, any of the following sequences may be
performed.
Use the DOWN button to position the cursor next to LINES/FRAME, then push
MENU. The available scanning standards will be displayed, divided into two
screens: progressive formats and interlaced formats. Navigation between these
two menus is accomplished by placing the cursor beside the NEXT or PREV
PAGE items and pressing MENU. A set of Progressive Formats or Interlaced
Formats will be displayed.
Use the DOWN button to position the cursor next to OFFSETS, and then push
MENU. Use the UP / DOWN buttons to toggle the setting between offsets
enabled/disabled. When offsets are enabled, the front-panel OFFSET controls
can be used to position CH2 and CH3 vertically with respect to CH1. When
pushed, the CH 3 OFFSET control positions CH B with respect to CH A. When
these controls are disabled, the signals are aligned. Once selection is made, press
MENU once to return to the main menu or twice to return to normal front-panel
controlled operation.
Use the DOWN button to position the cursor next to SUBTRACT, and then push
MENU. Use the UP / DOWN buttons to toggle between YES and NO. Selecting
YES enables the 1735 HD to subtract the CH1B input from the front-panel
selected inputs. Once selection is made, press MENU once to return to the main
menu or twice to return to normal front-panel controlled operation.
Use the DOWN button to position the cursor next to EXT HORIZ, and then push
MENU. Use the UP / DOWN buttons to toggle between YES and NO. Selecting
YES switches operation to the External horizontal input. The input is through the
rear-panel connector (shown in the Installation section). Internal jumper
selection provides choice of positive or inverted polarity. Once the selection is
made, press MENU once to return to the main menu or twice to return to normal
front-panel controlled operation.
Use the DOWN button to position the cursor next to CLAMP, then push MENU.
Use the UP / DOWN buttons to toggle between FAST and SLOW. Once
selection is made, press MENU once to return to the main menu or twice to
return to normal front-panel controlled operation.
Use the DOWN button to position the cursor next to FILTER, and then push
MENU. Use the UP / DOWN buttons to toggle between DIFF STEP and
NOISE. Once selection is made, press MENU once to return to the main menu or
twice to return to normal front-panel controlled operation.
Lines / Frame
Offsets
Subtract
Ext Horiz
Clamp Type
Filter
Summary of Contents for 070-8462-03
