Tektronix 070-8462-03, Instruction Manual

Page: 140 / 271

Adjustment Procedure
1735 HD High Definition Waveform Monitor
6–5
Standard Adjustment Procedure
The initial settings of the front-panel controls to start this procedure are shown in
Table 6–1. Adjustment locations are shown in Figures 6–1 and 6–2.
NOTE . When selecting an input channel for display, CH1, CH 2, or CH 3 as well
as A or B must be pushed. For example, push CH 1 and A for a display of the
CH 1A input.
When selecting a sweep rate, both ONE/TWO/ THREE and LINE/FIELD must
be pushed. For example, push ONE and LINE for a one-line display.
Table 6–1: Initial settings for Adjustment
Procedure
Front-panel control Setting
POWER ON
REF CH 1
INPUT CH 1A
CLAMP off
VERTICAL
VAR off
X5 off
DC CPLG off
FLAT – FILTER FLAT
HORIZONTAL
ONE – TWO – THREE ONE
LINE – FIELD LINE
MAG – READOUT off
LINE SELECT off
MENU off
MENU SETTINGS OFFSETS DISABLED
FOCUS as desired
SCALE as desired
INTENS as desired