Tektronix, Inc. P6240, User Manual

Page: 187 / 321

TLS 216 User Manual
3–105
Saving and Recalling Setups
The TLS 216 Logic Scope can save and recall setups you might want to reuse
later. For example, you might start with an initial setup to begin an experiment
and, after making control changes as the experiment progresses, wish to return to
it later. This article describes how to save and recall a setup.
To Save a Setup
To save setups in either internal memory or on the file system floppy disk, do the
following procedures.
To save the current setup to any one of the 10 internal setup memories, do the
following steps:
1. Press Save/Recall SETUP
➞
Save Current Setup (main). (See Fig-
ure 3-51.)
Figure 3-51: Save/Recall Setup Menu
Store Internally