Tektronix, Inc. P6240, User Manual

Page: 107 / 321

Choosing a Group Display Mode
TLS 216 User Manual
3–25
To Check the Display Mode
To quickly determine the mode of any defined group, look at the Vertical
Readout. It shows each group by number, along with the volts/division setting
for each group displayed in Analog mode. Groups displayed in BusForm or
Timing Diagram modes display Bus or Timing rather than the volts/division
setting. (See Figure 3-8.)
NOTE
. The Vertical Readout displays group readouts for one of two pages of
groups at a time, where page one displays Group1 through Group 4 and page
two displays Group 5 through Group 8. To force the readout to display a certain
page, select a group included in that page. Use the group selection buttons or
the More menu to select the desired group.
NOTE
. The Vertical Readout also varies its display in other ways based on the
logic scope setup. See To Check Group Settings on page 3–56 for a complete
description of the Vertical Readout.
To determine the overall status of all groups, press SHIFT
➞
STATUS
➞
Waveform (main)
➞
Groups (side). (See Figure 3-9.)
Figure 3-9: Snapshot of Group Status