Tektronix, Inc. P6240, User Manual

Page: 189 / 321

Saving and Recalling Setups
TLS 216 User Manual
3–107
2. Press Overwrite Lock in the side menu to toggle it to OFF. (If Overwrite
Lock does not appear in the side menu, press –More–.)
3. Press Save Current Setup (main)
➞
To File (side) and select the name of
an existing file.
4. Press Save To Selected File (side) to complete the operation.
See Managing the File System on page 3–61 for more information on file system
operation.
To Recall a Setup
To recall saved setups from either internal memories or on the file system floppy
disk, do the following procedures.
To recall a saved setup from any one of the 10 internal setup memories, press
SETUP
➞
Recall Saved Setup (main)
➞
Recall Setup 1, Recall Setup 2, ...
Recall Setup 10 (side).
Recalling a setup will not change the menu that is currently displayed. If you
recall a setup that is labeled factory in the side menu, you will recall the factory
setup. (The conventional method for recalling the factory setup is described
below.)
To recall a stored setup from a file on the floppy disk, do the following steps:
1. Press SETUP
➞
Recall Saved Setup (main)
➞
From File (side).
2. Turn the general purpose knob to place the scroll bar over the file that
contains the setup to be recalled. (Only files with .set extensions will be
displayed).
3. Press Recall From Selected File (side) to complete the operation.
To Recall the Factory Setup
To reset your logic scope to the factory defaults, press SETUP
➞
Recall
Factory Setup (main)
➞
OK Confirm Factory Init (side).
See Appendix D, Factory Initialization Settings, for a list of the factory defaults.
Recall Internal Setups
Recall from Disk