Tektronix, Inc. P6240, User Manual

Page: 44 / 321

Example 3: Taking Measurements Automatically
1–24
TLS 216 User Manual
Group Definition menu to select the channel. Return to the Measure menu to
select the measurement.
Figure 1-17: Measure Main Menu and Select Measurement Side Menu
7. Press GROUP MENU
➞
Group Definition (main)
➞
Last Channel
(side). Press Last Channel again to increment it to 2. Press AUTOSET.
8. Press Selected Channel (side) twice to select it and increment it to
Channel 2.
Note that, for any group, the logic scope intensifies the selected waveform in
that group on screen to help you identify it.
9. Press MEASURE
➞
Select Measmnt (main).
10. Press Positive Width (side)
➞
–more– (side)
➞
Rise Time (side)
➞
Positive Duty Cycle (side).
Observe from the measurement readouts that the logic scope takes all three
measurements on the channel you just selected, Channel 2.
11. To move the measurement readouts outside the graticule area, press CLEAR
MENU. (See Figure 1-18.)