Tektronix, Inc. P6240, User Manual

Page: 38 / 321

Example 2: Grouping Waveforms
1–18
TLS 216 User Manual
indicators at the left side of the screen can also be used to identify each
group).
5. Press GROUP MENU to display the menu for defining the selected group.
6. Press Group Definition in the main menu.
Note that the side menu settings for First Channel, Last Channel, and
Selected Channel match the GROUP 6 readout. With the same channel (2)
set for First Channel and Last Channel, the group is currently defined to
include only one channel.
7. Press First Channel in the side menu. In the key pad, press 3, and then press
ENTER.
8. Press Last Channel in the side menu. In the key pad, press 6, and then press
ENTER.
Observe that Channels 3 through 6 are displayed as a superimposed,
contiguous, four-channel group. (See Figure 1-14.) The driven channels,
Channel 3 and Channel 4, appear as closely overlapped waveforms; the
channels not coupled to probe calibration signals, Channel 5 and Channel 6,
appear as closely overlapped flat lines.
In addition to using the key pad, you can turn the general purpose knob or
toggle the appropriate side menu button to set the first, last, and selected
channels.
Figure 1-14: Vertical Waveform Groups