Tektronix, Inc. P6240, User Manual

Page: 192 / 321

Saving and Recalling Waveforms
3–110
TLS 216 User Manual
Floppy disk storage operates as follows:
H
The logic scope can save a number of groups limited only by the number of
floppy disks available. Each group can contain up to 16 waveforms.
H
The logic scope does not display stored groups from the disk. It can,
however, recall groups from disk to any of the four internal reference
memories for display using the More menu.
H
When recalling waveforms into reference memories, remember the logic
scope can display 16 waveforms total in those four memories.
To Save a Group
To save a group to an internal reference memory, do the following steps.
1. Select the group that you want to save.
CAUTION.
Before doing step 2 that follows, note that if you choose a reference
memory location labeled active (see Figure 3-52), you will overwrite the
waveform group previously stored there. You can store groups in reference
locations labeled empty without disturbing previously stored waveforms.
2. Press Save/Recall WAVEFORM
➞
Save Group (main)
➞
To Ref1, To
Ref2, To Ref3, or To Ref4 (side).
External Storage
Store Internally