________________________________________________________________________________
EVO STAR 60-800
9
2
HANDLIND, STORING AND POSITIONING
2.1
HANDLING
1.
Remove the screws which fasten the machine to the pallet (Picture 2.1)
2.
Remove the wooden pallet by using a lift truck and carefully place it on the floor (Picture 2.2)
3.
For floor handling you will only need a transpallet with a suitable loading capacity
2.2
U.P.S. STORAGE
2.2.1 U.P.S.
If you need to store the UPS this must be protected from dust and dirt (even if it is well packaged). It must not be
exposed to the inclemency of the weather and the room shouldn’t be too humid (humidity below 90% non-
condensing), nor should the UPS be exposed to sources of heat; room temperature should be b1 e +40°C.
2.2.2 BATTERY CABINETS
If you need to store a complete battery cabinet, you should respect all the conditions mentioned in the previous
paragraph. You should also remember that battery discharge over time, even when not in use, therefore
it is necessary
to recharge them every 4 months.
In any case, you must follow the manufacturers’ indications to store the batteries.
Non-compliance with these indications can cause an efficiency decrease and a
shorter life of the storage batteries.
Picture2.1
Picture 2.2
