________________________________________________________________________________
EVO STAR 60-800
31
SYSTEM
Error code
Display message
Description
Seriousness
SY1
Inverter w/o load
Inverter without load
Anomaly
SY2
Load on back-up
Load on mains
Anomaly
SY3
Error out voltage
Error in output voltage
User /failure
SY4 High
Temperature
Temperature
block
Anomaly
SY5
Pretemp. alarm
Critical temperature
Anomaly
SY6
Error direct voltage.
DC Link voltage error
Anomaly
SY7 Mains
error
Power
supply in alarm
Anomaly
RECTIFIER
Error code
Display message
Description
Seriousness
RC1
High Temperature
High Temperature
Anomaly
RC2
Cyclic sense error.
Cyclic sense error.
User
RC3
Rectifier Error
Rectifier alarmed
Failure
RC4
Boost charge
Boost charge activity
User
RC5
Voltage Error
Error in mains voltage
Anomaly
INVERTER
Error code
Display message
Description
Seriousness
IV1
Inverter off
Inverter off
User / Anomaly
IV2
Desaturation IGBT
Desaturation IGBT
failure / User
IV3
Voltage Error
Error in inverter voltage
Anomaly / failure
IV5
Inv. Not synchronised
Error in frequency synchronism
Anomaly
IV6
Frequency error
Frequency error
Anomaly
IV7
Current > 125%
Output Current > 125%
Anomaly
IV8
Current > 150%
Output Current > 150%
Anomaly
IV9
High current
Output Current outside parameters
Anomaly
BACK-UP
Error code
Display message
Description
Seriousness
RS1
Cyclic sense error.
Cyclic sense error.
User
RS2
Voltage Error
Voltage Error
Anomaly
RS3
Frequency error
Frequency error
Anomaly
BREAKERS
Error code
Display message
Description
Seriousness
SZ1
Rectifier Error
Rectifier breaker
User
SZ2
Back-up error
Back-up breaker
User
SZ3 Output
error
Output
breaker
User
SZ4
By-Pass
Manual By-pass
User
SZ5
Battery error
Battery breaker
User
OP1
User mode
Jumper in the relay board
User
Chart 3
7.1.2.3
BATTERY TEST
CAUTION! : CARRY OUT THE BATTERY TEST ONLY WHEN THE MACHINE IS IN
NORMAL MODE OPERATION
The battery test allows the user to check battery connection quality and fuse condition. To carry out the test press the F6
and the F3 keys together then press F6 to confirm, as specified in diagram 1. The test lasts for a minute, during which
the U.P.S. takes the necessary energy to maintain its load from the battery. At the end of the test the result will appear
under the form of “Good Battery” or “Bad battery”.
