________________________________________________________________________________
EVO STAR 60-800
41
Chart 4 (N.C.= Normally closed N.O.= Normally open)
The states associated to the relay are standard, but a specialised technician according to necessity can modify them. You
can verify the state of the relays with the led’s (picture 18) which are placed above each relay.
8.11 RECTIFIER FILTER
This board is a RC filter on DC voltage generated from rectifier.
8.12 BATTERY FUSE
It is on battery connection line. It is placed on A13 wire to protection against battery overcurrent.
Jumper M2.
It
must be
removed if you
install remote
Jumper R9. It
must be removed
if you install
remote EPO
JP1: A01 program
Connection from A14
Picture 8.4
