________________________________________________________________________________
EVO STAR 60-800
48
13 SNMP
13.1 SNMP
SNMP adaptor is able to monitor measure and alarms of UPS. It needs to the control kit B00. Shutdown software
can advise the user in case of main fault, can control automatic pc shutdown if battery autonomy is turning off.
Monitoring software can read in real time measures on device (output voltage, input voltage, temperature, etc).
Is possible to know alarms, voltage break down, anomalies that took place during working time or in progress, it is
possible to send e_mails, system shut down etc.
13.2 ISTALLATION
Kit Mini NetAgent
It is suggested a extension wire to connect B24 and device
Extension wire
Female DB9
Male DB9
Pin 9
Pin 9
Pin 6
Pin 6
Pin 7
Pin 7
14 OUTPUT FREQUENCY
CAUTION!:
It is necessary turn off the’U.P.S and disconnect it from load
It is possible to set input/output frequency to 50 Hz or 60 Hz. In order to change frequency ask a qualified
technicians
Don’t turn on the U.P.S. if input and output frequency are not equal
.
Frequency conversion is an operation made to F2000 devices
that are not the subject of this manual.
