TEC B-SX4T Series, User Manual

Page: 260 / 316

6. ON LINE MODE
EO18-33012A
6.3 DUMP MODE
6- 8
6.3 DUMP MODE
In Dump mode, any characters sent from the host computer will be printed. Received characters are
expressed in hexadecimal values. This allows the user to verify programming commands and debug
the program.
(1)
The printer is turned on, standing by, or printing.
(2)
Press the [PAUSE] key.
(3)
During the Pause state, press and hold the [RESTART] key for 3 seconds or more.
The display shows “<1> RESET”.
(4)
Press the [FEED] key. The display shows “<2>PARAMETER SET”.
(5)
Press the [FEED] key. The display shows “<3>ADJUST SET”.
(6)
Press the [FEED] key. The display shows “<4>DUMP MODE”. Press the [PAUSE] key to enter
the Dump Mode.
(7)
Select the receive buffer to be dumped with the [FEED] or [RESTART] key.
(8)
Select the printing method with the [FEED] or [RESTART] key.
(9)
Press the [PAUSE] key to start printing. The printer prints the data in the selected receive buffer.
(10) After completing the printing, the display returns to “<4>DUMP MODE”.
[FEED]
[RESTART]
•
RS-232C: RS-232C Receive Buffer
•
CENTRO: Centronics Receive Buffer
•
NETWORK: Network Interface Receive Buffer
•
BASIC 1: BASIC Interpreter (I/F Interpreter buffer)
•
BASIC 2: BASIC Interpreter (Interpreter Printer buffer)
•
USB: USB Receive Buffer
PAUSE 52
B-SX4T Vx.x
NOW PRINTING…
<4>DUMP MODE
BUFFER RS-232C
ON LINE
B-SX4T Vx.x
<2>PARAMETER SET
<4>DUMP MODE
BUFFER RS-232C
<3>ADJUST SET
<1>RESET
<4>DUMP MODE
The number of unprinted media (See NOTE .)
ON DEMAND
ALL
[RESTART]
[FEED]
The printer prints 166 lines (approx. 50cm) and then
pauses printing.
The printer prints all buffer data, and then stops printing.