TEC B-SX4T Series, User Manual

Page: 239 / 316

5. SYSTEM MODE
EO18-33012A
5.6 TEST PRINT
5-50
5.6.8 Factory Test
While selecting the Factory test, press the [PAUSE] key to start printing the factory test pattern.
After printing is completed, the display returns to “<4>TEST PRINT”.
Pressing the [PAUSE] key causes the display to shown “FACTORY TEST” again. Then, press
the [FEED] key.
„
Print Sample of Factory Test
5.6.9 Auto Print
While selecting the Auto Print, press the [PAUSE] key to feed one media and print slant lines (3
dots) on 5 pieces of media.
Next, press the [PAUSE] key to print bar codes on 5 pieces of media. Pressing the [PAUSE]
key again causes the printer to print characters on 5 pieces of media.
NOTES: 1. Select “AUTO PRINT (TRAN)” when using labels, and “AUTO PRINT (REFL)”
when using tag paper.
2. Auto print is performed under the conditions below. Parameter setting and print
tone fine adjustment value is ignored.
Print speed: 6 inches/second (B-SX4T)
5 inches/second (B-SX5T)
Sensor type: Black mark or feed gap sensor
Printing method: Thermal transfer
Issuing mode: Batch printing
Label size: 76mm
Print tone fine adjustment value:
±
0
)$&725< 7(67
$872 35,1775$1
$872 35,175()/
Feed Gap Sensor
Black Mark Sensor