Teac DR-L700, Owner'S Manual

Page: 26 / 128

26
ENGLISH
Connection 5
A
B
FRONT
SPEAKER
FRONT
SPEAKER
Speaker Connections
Caution:
To avoid damaging the speakers with a sudden high-
level signal, be sure to switch the power off before
connecting the speakers.
Check the impedance of your speakers. Connect
speaker with an impedance of 6 ohms or more.
The red speaker terminals are + (positive), and the black
terminals are - (negative).
The + side of the speaker cable is marked to make it
distinguishable from the - side of the cable. Connect this
marked side to the red + terminal and the unmarked
side to the black terminal.
Prepare the speaker cords for connection by stripping
off approximately 10 mm or less (no more as this could
cause a short-circuit) of the outer insulation.
Twist the wires tightly together so that they are not
straggly :
How to connect
Turn the terminal cap counterclockwise to loosen it.
The speaker terminal caps cannot be fully removed
from the base.
Insert the wire into the terminal fully and turn the
terminal cap clockwise to securely connect it :
Make sure it is fastened firm by pulling the cable
lightly. 3
B
2
1
A