![background image](http://html1.mh-extra.com/html/tdsi/sologarde/sologarde_user-manual_3896942021.webp)
The next option is the Time Group
Time Group
Time Group
Time Group in which the user(s) are to be members of.
Press the *
**
* key to view and change the options for the Time Group.
TZ1
TZ1
TZ1
TZ1. Members of the Time Zone 1 group are valid when the Time
Time
Time
Time input is off
(i.e. high or at +12 V).
TZ2
TZ2
TZ2
TZ2. Members of the Time Zone 2 group are valid when the Time
Time
Time
Time input is on
(i.e. low or at 0 V)
TZ1 +TZ2
TZ1 +TZ2
TZ1 +TZ2
TZ1 +TZ2. Members of the Time Zone 1 plus Time Zone 2 group are valid
regardless of the state of the Time input.
Use the
or
keys to highlight your required Time Group
Time Group
Time Group
Time Group and press the *
**
* key
to select it.
The final option is the card Type
Type
Type
Type. Press the *
**
* key to view and change the options
for the card Type
Type
Type
Type.
Standard
Standard
Standard
Standard. The lock time that has been set up in the controller will apply to
this card.
DDA
DDA
DDA
DDA. The lock time that will apply to the card will be double that of the lock
time set in the controller, allowing more time for the person to pass through
the door.
Toggle
Toggle
Toggle
Toggle. The card will toggle the state of the door relay. This is particularly
useful for temporarily unlocking a door for example
a meeting room or
lecture theatre or setting
unsetting of an intruder panel.
Use the
or
keys to highlight your required card Type
Type
Type
Type and press the *
**
* key to
select it.
Once all of the options have been set, it is time to validate the card. Ensure that
the Validate
Validate
Validate
Validate option is highlighted (flashing) and press the *
**
* key.
Confirm the entry by pressing the *
**
* key once again. The controller will emit a
single bleep to indicate that programming of the card has been successfully
completed. Once the card has been added to the system OK
OK
OK
OK is displayed. If the
display shows Mem Full
Mem Full
Mem Full
Mem Full then the controller memory is full. Delete some unused
cards to make room for the new card(s) – refer to section 0 of this manual.
Hint: if you want to use the default settings for each of the options card Mode, Time Group and
Hint: if you want to use the default settings for each of the options card Mode, Time Group and
Hint: if you want to use the default settings for each of the options card Mode, Time Group and
Hint: if you want to use the default settings for each of the options card Mode, Time Group and
Type, once you have entered t
Type, once you have entered t
Type, once you have entered t
Type, once you have entered the card number, you can simply scroll down to the Validate option
he card number, you can simply scroll down to the Validate option
he card number, you can simply scroll down to the Validate option
he card number, you can simply scroll down to the Validate option
(using the
(using the
(using the
(using the
button) and press the * key to validate the card quickly.
button) and press the * key to validate the card quickly.
button) and press the * key to validate the card quickly.
button) and press the * key to validate the card quickly.
1
certain versions only.
Add
Confirm?
Validate
Mode
Type
Validate
Time Grp
Type