Once all of the options have been set, it is time to validate the card. Ensure that
the Validate option is highlighted (flashing) and press the *
**
* key.
Confirm to replace the card properties by pressing the *
**
* key once again. The
controller will emit a single bleep to indicate that programming of the controller
has been successfully completed and OK
OK
OK
OK is displayed.
1
certain versions only.
3.3
3.3
3.3
3.3
Deleting Cards
Deleting Cards
Deleting Cards
Deleting Cards
Cards are deleted using the SOLOgarde hand-held programmer.
3.3.1
3.3.1
3.3.1
3.3.1
Deleting a Single Card
Deleting a Single Card
Deleting a Single Card
Deleting a Single Card
Turn the hand-held programmer on and connect it to the bottom of the reader or
the USB socket on the Wall Mounting Box and log-in to the controller by entering
the 4-digit password followed by the *
**
* button. For more details on logging-in and
the password feature, please refer to section 4.2 of this manual.
Press the
key until the Card
Card
Card
Card option is highlighted (flashing). Press the *
**
* key to
select it.
Press the
key until the Delete
Delete
Delete
Delete option is highlighted (flashing) and press the *
**
*
key to select it.
With the Single
Single
Single
Single option selected, press the *
**
* key to select.
Either enter the card number to be deleted using the numeric keypad or simply
present the card (if available) to be deleted to the reader. The card number will
automatically appear on the programmer display. Once the card number has been
entered, press the *
**
* key to enter it.
Confirm to delete the cards by pressing the *
**
* key once again. The controller will
emit a single bleep to indicate that deletion of the card has been successfully
completed. Once the card has been deleted from the system OK
OK
OK
OK is displayed. If
the display shows Invalid
Invalid
Invalid
Invalid then the card was not found in the memory and you
are prompted to enter a valid card number.
3.3.2
3.3.2
3.3.2
3.3.2
Deleting a Block of
Deleting a Block of
Deleting a Block of
Deleting a Block of Cards
Cards
Cards
Cards (Mifare Cards only)
(Mifare Cards only)
(Mifare Cards only)
(Mifare Cards only)
Turn the hand-held programmer on and connect it to the bottom of the reader.
For more details on logging-in and the password feature, please refer to section
4.2 of this manual.
Edit
Replace?
Validate
Mode
Delete
Confirm?
Number
00485525
Single
Block
Delete
Add
Card
Keypad
